A few things to report. Firstly, not much progress. I was a little distracted with preparing for and then undertaking a sponsored walk for the charity Open Doors, which serves persecuted Christians worldwide. Christians get beaten up and worse for their faith and that can’t be right. So a friend of mine, Chris and I walked 140 miles over 7 days, attracting donations of £3,600 and raising awareness of Open Doors.
Back to the MG, I had recently managed to obtain a part on the bonnet gas strut that I had mullered on installation, so that’s now working and here is a photo showing the bonnet proudly erect on its struts. All very nice, but during fitting, the hinges took a bit of stick with one gas strut agressively pushing up one side and so now the bonnet needs a press at the top edge when lowered so that is something to be sorted one day…(not a priority!)
I didn’t have long on Saturday to work on the MG so I had to be selective about what I tackled. As usual, a quick garage tidy is always a good start and I managed to reorganise things to give a bit more room. Then I focussed on what parts I would need to have organised to tackle the engine and gearbox installation. Chief among these is the cross-member and its associated mountings. As I did not take the engine and gearbox out, this involved a bit of guess work in sorting through the bag of nuts and bolts I was given after it was taken out. It actually didn’t take too long to figure it all out, althought it is quite a complex arrangement and I think will be very fiddly to install. See photo below of the mocked up cross-member. Its still in primer as I haven’t finished refurbishing it yet.
Latest theory from having taken some advice, it to install the gearbox first, then the engine, having trial mated them together first. This is because the combined unit is very long and its challenging to get all the angles to work to fit it in. So I am now focussed on getting this installation done (with a little help from my friends of course) as soon as I can. This won’t be that soon as my 25th Wedding Anniversary is coming up and a holiday to Crete, but after that I am going to focus on this and push on with the job. Wish me well, this next bit could be a challenge!