One of the face vents on the Beetle had ceased working a long time ago and with me also wanting to replace the hazard lights switch which is in the same panel it was time to tackle the not uncomplicated task of removing the central dashboard panel.

First you have to remove the front top panel which simply slides out and lifts off to reveal 2 x screws. At the bottom end there is a switch panel which comes apart with a combination of push fit and screwed fittings.

Next to remove is the radio and I’m going to give the short version here. I used two special keys which slide into slots on either side of the radio unit which unclip the radio and allow you to pull it out and disconnect it. I made that sound simple. It wasn’t.

This reveals the final 2 x screws which enables the panels to be removed and all cables disconnected. Only the panel doesn’t want to come off. Something is keeping it on – it comes so far then stops fast. Mmm. A wiggle. An exploratory tug and the brittle plastic creaks ominously. more perseverance, a few different angles and I can ease the panel off – phew.

Panel removed I can clearly see the snapped lever which operates the face vents. Later I try to screw it together and end up drilling a tiny hold and using a small cable tie. Not elegant but effective.

I borrow some long nosed pliers from a friend to free the hazard switch and order a new one online. It will be funny if the new switch doesn’t fix the clicky indicators….! (An internet search diagnosed this as the problem).

Watch this space!