I ordered a second hand distributor in an attempt to resolve the non-starting engine. Suspecting a timing issue, my Dad and I have gambled with the idea of getting it started with a good old-fashioned mechanical distributor in lieu of the Accuspark unit. The electronic distributer is great I’m sure, but you can’t see what is working or not, so anyway, today I bolted the new used mechanical distributer into the MG and tightened up the clamp. The distributer clamp is one of those awkward jobs on the MG where the spanner (7/8th) has about 30 degrees of movement and needs to be turned around to get at the next turn. So doing the bolts up to the clamp is a long job and you have to get into a zen like state and push through it. Or you can have a really good podcast playing in the background, such as Adam Buxton’s ramblechat with Louis Theroux.
Before tightening up the distributor clamp (I had actually popped the unit in a couple of weekends ago, including the long job of removing the clamp bolts) I had to see to the troublesome oil cooler pipe connection to the oil filter base. Having thought I had sorted this out previously, I had attempted to start the MG recently and not realising this was not done up correctly, had managed to create a large puddle of oil on the driveway. This is my second offence and although Helen was very understanding I was really annoyed at myself for this careless error. I now actually have a shortage or oil, so will be ordering some more soon and will need to remember to stick some cardboard under the car just in case. The error was to have the crush washer in the wrong place, something easily diagnosed when I checked in the catelogue.
I’ve sorted another issue through a second-hand purchase. The inlet manifold of the MGB has a bolted in connector onto which the vacuum pipe fits. On my inlet manifold, the connector was missing, and I don’t remember removing it. Having scoured the online MG catelogues I identified the part number but it was notified as being on back order, so not available any time soon. So I took the plunge and ordered a second hand inlet manifold from eBay that looked like it had the right fitting. It arrived as described and had the fitting. So problem solved and a paper-weight to boot (the surplus manifold). Now fitted on the MG, if only I could find the plastic end piece which I carefully stored away…
More ordering with SC Parts has resulted in two large boxes arriving at Relentless Duck Restorations Goods Inwards containing shiny new seat rail kits. The seat rails have mystified me for a while. The car only came with three out of the required four, and I have been baffled as to how the rails work. Now with the new rail kits from SC Parts, I can see that there was a lot more missing, so I am now reassured that the fit will be relatively straightforward. Not that I’ll be fitting the seats just yet, as I have the roof lining to fit before I work down to the carpets and seats.
I received a fun classic car related present from fellow enthusiast ‘Puddleduck’. Its the Haynes classis cutaways colouring book. Apparantly colouring in is good for mindfulness, being in the moment and all that. Puddleduck also has the book and he admitted that he sometimes goes onto classic care trader websites to check up on paints schemese and details such as indicator / side light configuration so he can shade in accurately. Crikey, that’s a level of dedication I can only dream of. Anyway, thanks Puddleduck.